Gateways, switches & access points.
Cloud Gateways and UDM consoles, PoE switching, and WiFi 6/6E/7 access points — installed, adopted, and configured as one system: VLANs, firewall rules, and WiFi tuned to the building rather than left on defaults.
UniFi installer in New York City.
ShiftCTRL installs, configures, and supports Ubiquiti UniFi systems across the five boroughs — WiFi, switching, gateways, UniFi Protect cameras, UniFi Access door control, and UniFi Talk phones — with the structured cabling to carry them. Engineer-led installs, end to end.
ManhattanBrooklynQueensThe BronxStaten IslandLong Island
UniFi installation, end to end.
The full UniFi line — Network, Protect, Access, and Talk — installed as one system by the engineers who design it, on cable we pull ourselves. One install, one console, one handover.
Security cameras & NVRs.
Camera placement, mounting, and wiring with NVR sizing and retention policy configured before the first clip records. Commissioned under real lighting — day, night, and backlit entries.
Door readers & access control.
Readers, hubs, and door hardware wired and configured — unlock schedules, tenant policies, and visitor flows mapped to how the building actually operates.
VoIP phones.
Desk phones and dial plans on the same stack as the network — with the QoS work that keeps voice clean alongside cameras and staff devices.
Cat6 / Cat6A & fiber.
We pull our own cable — in-house, with vetted partners alongside on larger builds. Drops, risers, and fiber backbones terminated to TIA-568, with patch panels and racks built to a labeling scheme the next technician can read.
Adoption, migration, multi-site.
Self-hosted or cloud consoles, UDM migrations, and multi-site architectures — with backups configured and verified before handover.
What a UniFi installation includes.
From the first walkthrough to the as-builts. A two-AP storefront and a five-floor office don’t get the same package — we scope against the building and tell you what’s in and what’s not before work begins.
IN-01Site survey and walkthrough
IN-02Itemized equipment list (BoM) — every device and cable on its own line
IN-03Cable runs, terminations, and testing
IN-04Rack build, patch panels, and labeling
IN-05Mounting — access points, cameras, readers
IN-06Controller setup and device adoption
IN-07VLANs, firewall rules, and WiFi tuning
IN-08Camera commissioning under real lighting
IN-09Access schedules and door hardware checks
IN-10PoE budget and UPS runtime verification
IN-11As-built documentation at handover
IN-12Post-install support — ad-hoc or managed
UniFi installation across all five boroughs.
On-site across New York City and Long Island with no travel fee. Westchester, Northern New Jersey, and Connecticut are on-site too — and anywhere beyond, with travel disclosed and quoted up front.
Borough 01ManhattanFinancial District, Midtown, Upper East Side, Upper West Side, Chelsea, SoHo, Tribeca, Greenwich Village
Borough 02BrooklynWilliamsburg, DUMBO, Park Slope, Bay Ridge, Brooklyn Heights, Bushwick, Greenpoint, Cobble Hill
Borough 03QueensLong Island City, Astoria, Forest Hills, Flushing, Jackson Heights, Sunnyside, Bayside, Ridgewood
Borough 04The BronxRiverdale, Fordham, Pelham Bay, City Island, Mott Haven, Throgs Neck, Kingsbridge, Morris Park
Borough 05Staten IslandSt. George, Tottenville, Great Kills, New Dorp, Stapleton, West Brighton, Tompkinsville, Annadale
Nassau + SuffolkLong IslandGarden City, Manhasset, Huntington, Smithtown, Port Washington, Great Neck, Syosset, Commack
Greenfield
New installations.
Ground-up UniFi buildouts for offices, schools, houses of worship, nonprofits, retail, warehouses, and complex homes. We design the network first — every access point placed, every drop specified, every port mapped — then install to that plan. If you want the design ahead of the install, that’s our network design service.
- Offices and coworking floors
- Schools and academic buildings
- Houses of worship and nonprofits
- Retail, restaurants, and showrooms
- Warehouses and industrial space
- Townhomes, brownstones, and larger residences
Takeover
Fixes & takeovers.
We also take over UniFi networks other installers left behind. We diagnose the console first, then stabilize, re-document, and finish what was left incomplete — nothing that can disrupt service moves without your sign-off.
- Console unmanaged, unstable, or stuck mid-update
- Access points meshing wirelessly where wire exists
- Cameras filling the NVR faster than the retention policy promised
- VLANs nobody can explain — or a flat network with none
- Devices adopted to a controller nobody has credentials for
- A rack no one can trace and no documentation from the last installer
Installed and supported for named clients.
Engagement notes from real UniFi work — written up, with the client named.
Ahmadiyya Muslim CommunityMulti-site UniFi deployment — Queens and the Bronx, one console across buildings.Read the engagement The Lang School17-AP WiFi density review for a multi-floor school.Read the engagement Christ Church BronxvilleUDM Pro root-cause diagnostic with a signed close-out report.Read the engagement
All engagements PricingRates & minimums →
Line-item equipment. Quoted before work begins.
Equipment is quoted as an itemized bill of materials, every device and cable on its own line, before any work is scheduled. Rates and minimums are published on the pricing page, or rough out a budget with the project cost estimator.
Survey
A walkthrough or your floor plan and photos — enough to understand the building before anything is priced.
Quote
A line-item quote: labor on its own line, equipment as an itemized bill of materials. No bundles, no allowances.
Install
Cabling, mounting, rack work, adoption, and configuration — scheduled around your hours where the building requires it.
Handover
As-built documentation, credentials in your hands, and a walkthrough of the system. Managed support if you want it.
Frequently asked questions.
If your question is not here, send it — a senior engineer reads every inbound.
Do you install UniFi networks in New York City?
Yes — UniFi installation is our core service. We design, install, and support UniFi networks across Manhattan, Brooklyn, Queens, the Bronx, and Staten Island, plus Long Island, Westchester, Northern New Jersey, and Connecticut.
What does a UniFi installation cost in NYC?
Equipment is quoted as an itemized bill of materials before any work is scheduled, and labor is scoped from your floor plan or a walkthrough — a two-AP storefront and a multi-floor office land in very different places. Current rates and minimums are published on our pricing page.
Do you install UniFi Protect cameras and UniFi Access door control?
Yes. Protect cameras and NVRs, and Access readers, hubs, and door hardware go in on the same engagement as the network — one cabling pass, one console, one handover.
Can you fix or take over a UniFi network someone else installed?
Yes. We diagnose the existing console first, then stabilize, re-document, and finish what was left incomplete — nothing that can disrupt service changes without your sign-off.
Do you handle residential UniFi installations?
Yes. We install UniFi in townhomes, brownstones, and larger residences alongside our commercial work — same engineers, same documentation discipline.
Do you handle the cabling, or do we need a separate contractor?
We pull our own cable — in-house crews, with vetted partner firms alongside on larger builds. Cat6 and Cat6A drops, fiber backbones, patch panels, and rack builds all land under one accountable scope, terminated to TIA-568, tested, labeled, and documented in the as-builts at handover.
GET IN TOUCH
Planning a UniFi installation?
Send us your floor plan, a few photos of the space, or just the address and what you’re trying to do — we’ll come back with what the install needs and a line-item quote.